Tips For Wearing Non-slip Elastic Bands
Sep 12, 2021
There are also some particulars and tricks for wearing non-slip elastic bands. The editor has made a detailed arrangement, including the following three types:
Wear one:
Things to prepare: new non-slip elastic bands, scissors, safety pins, needles and threads.
process:
(1) Use scissors to cut a small opening in the waistband.
(2) Pull out the old elastic band from the small mouth and cut it off.
(3) Connect the new elastic band with the old elastic band with a safety pin. Pull the other end of the old elastic band outwards. In order to prevent the end of the new elastic band from being pulled into the waist of the trousers, use a bead needle to fix the end adjacent to it.
(4) After the old elastic band is pulled out, remove it, and stack the two ends of the new elastic band and stitch them together.
(5) Sew the small cut on the waistband of the trousers.
Wearing method two:
Material: paper clips, Shanjun pliers
process:
(1) Find a paper clip and straighten it with your hands.
(2) Use Shanjun's pliers to make the paper clip into a zigzag shape.
(3) Pass the rope or elastic through it.
(4) It is not made into a loop, but is used to tie the elastic or rope with the iron wire of a paperclip.
(5) Then force and tighten.
(6) Note that the rope should not be too long, or it is not easy to wear. Process the paper clip to make it a better point of view, such as an arc, and then it can be worn. If you get to a place that is not easy to wear, you can pull it hard without getting off the rope.
Wearing method three: first insert one from the head or make a small opening from the middle, pull the strap out and then wear it from the head, then tie one end of the non-slip elastic band to the pin or related things, and put it into the elastic band of the pants In the tunnel, push the pin on the outside with your hand until the ends of the elastic band meet, untie the pin and fasten both ends of the non-slip elastic band.
